Persistent dusty smell from furnace

2024.11.27 13:54 narwhals_on_mars Persistent dusty smell from furnace

I have a natural gas fired furnace that's part of a combined heating/cooling system in our basement. The blower motor has been running all summer with the cooling running, and when the heat turned on for the first time, there was a dusty smell. I expected it, since it's typical when the furnace starts up for the first time, but it hasn't fully gone away. It's died down a lot, but it's still faintly there. I mentioned the blower motor running all summer because I don't think it's the issue or source of the smell. I don't think it's a cracked heat exchanger, because the flames look normal. One odd thing, the smell coming out of the ducts is faint, but the smell is really strong in the basement, right inside the door at the top of the steps, like the smell is rising into the highest cavity. I'm just confused as to why the dusty smell is stronger in the basement than in the actual ducts. There's not a lot of airflow moving in or out of the basement, so maybe the air is just stagnant? I changed the air filter at the beginning of this month because it had been a while, and it was really dirty. I checked the new one just the other day, and it was already fairly dirty, so I replaced it again and turned the heat on to check. The smell was still there. The filter is tight in the slot, but there's still probably room for air to squeeze around it a little bit. The air ducts are probably filthy inside, we just bought the house a year ago, and I doubt anyone has ever had them cleaned. In addition, we tore out a closet in the basement, which created a ton of drywall dust that I've been cleaning up for months. Even when it looks clean, there's still a little dust left over. So, all this rambling to say, does it make sense that the extra dusty basement would be causing the issue? It never did this last year before we tore out all that drywall. Do you think it will go away eventually as I continue to vacuum and clean out the basement? Any ideas why the smell is stronger in the basement than in the supply ducts themselves?
submitted by narwhals_on_mars to hvacadvice [link] [comments]

2024.11.27 13:54 Beginning_Yam8399 Expansion

Expansion submitted by Beginning_Yam8399 to mapofawesomeness [link] [comments]

2024.11.27 13:54 CloverinaXerophilous How crows can extinguish fires at an early stage

How crows can extinguish fires at an early stage submitted by CloverinaXerophilous to BeAmazed [link] [comments]

2024.11.27 13:54 meAf74b Dophar ko Court ka Order pass hoga, Shaam ko ASI ayegi

Dophar ko Court ka Order pass hoga, Shaam ko ASI ayegi submitted by meAf74b to dankinindia [link] [comments]

2024.11.27 13:54 Then_Marionberry_259 OCT 03, 2024 AIR.V CLEAN AIR METALS REPORTS 50.7 M GRADING 4.52 G/T PT, 4.38 G/T PD, 0.99% CU AND 0.53% NI IN LATEST NEAR SURFACE HIGH-GRADE DRILLING RESULTS

OCT 03, 2024 AIR.V CLEAN AIR METALS REPORTS 50.7 M GRADING 4.52 G/T PT, 4.38 G/T PD, 0.99% CU AND 0.53% NI IN LATEST NEAR SURFACE HIGH-GRADE DRILLING RESULTS https://preview.redd.it/63hthavb9g3e1.png?width=3500&format=png&auto=webp&s=45be684684a3a18184dc50a6a15dd4180c169478
THUNDER BAY, ON / ACCESSWIRE / October 3, 2024 / Clean Air Metals Inc. ("Clean Air Metals" or the "Company") (TSXV:AIR)(FRA:CKU)(OTCQB:CLRMF) is pleased to announce additional high-grade drilling results from the Current deposit at its 100%-owned Thunder Bay North Critical Minerals Project ("TBN").
Assay highlights include:
  • 50.7 m of 4.52 g/t Pt, 4.38 g/t Pd, 0.99% Cu and 0.53% Ni(13.74 g/t Pt.eq1; 4.36% Cu.eq2) from 82.0 m downhole in Hole CL24-010, including
    • 6.35 g/t Pt, 6.10 g/t Pd, 1.32% Cu and 0.69% Ni over 30.7 m from 102 m,
  • 38.4 m of 3.38g/t Pt, 3.26g/t Pd, 0.72% Cu and 0.45% Ni (10.32 g/t Pt.eq1; 3.27% Cu.eq2) from 153 mdownhole in Hole CL24-005, including
    • 13.2 m of 8.39g/t Pt, 8.09 g/t Pd, 1.75% Cu, 0.95% Ni from 178.2 m. and;
    • 20.40 g/t Pt, 21.00 g/t Pd, 4.20% Cu and 2.18 % Ni over 0.5 m from 188.9 m. (Massive Sulphides)
  • 23.3 m of 4.54 g/t Pt, 4.23 g/t Pd, 1.11% Cu and 0.60% Ni (14.20 g/t Pt.eq1; 4.51% Cu.eq2) from 154.7mdownhole in Hole CL24-008, including
    • 13.8m of 6.01 g/t Pt, 5,56 g/t Pd, 1.45% Cu, 0.75% Ni, from 159.0 m.
  • 19.3 m of 3.61 g/t Pt, 3.26 g/t Pd, 0.79% Cu and 0.38% Ni (10.75 g/t Pt.eq1; 3.40% Cu.eq2) from 150 mdownhole in Hole CL24-006, including
    • 10.8 m of 5.33 g/t Pt, 4.65 g/t Pd, 1.13% Cu, 0.40% Ni from 157.0 m.
Notes
  1. Platinum equivalent are calculated as follows: Pt.eq = (Pt grade/31.1035 x $982 + Pd grade x 31.1035 x 86.2% x $1,057 + Cu grade x 2204 x 95.9% x $4.27 + Ni grade x 2204 x 57% x 7.58 + Au grade/31.1035 x 85% x $2,642 + Ag grade/31.1035 x 65.2% x $31.73) / $982 x 31.1035
  2. Copper equivalents are calculated as follows: Cu.eq= (Cu grade x 2204 x $4.27 + Pt grade x 31.1035 x 80.6% x $982 +Pd grade x 31.0135 x 86.2% x $1,057 + Ni grade x 2204 x 57% x $7.58 + Au grade/31.1035 x 85% x $2,642 + Ag grade/31.1035 x 65.2% x $31.73) / $4.27 / 2204
Equivalents are based on the following recoveries Pt 80.6%, Pd 86.2%, Cu 95.9% Ni 57%, Au 85%, Ag 65.2%; and metal prices from September 25, 2024 US Spot; Pt $982, Pd $1057, Cu $4.27, Ni $7.58, Au $2642, Ag $31.73
A summary of all assays is presented in Table 1.
Clean Air Metals' CEO Mike Garbutt commented, "The new drilling results confirm our belief that the tonnage of the highest-grade parts of the Current deposit is likely underestimated by the most recent resource model - largely because of an inadequate drilling density in these areas. Additional geophysical modeling and tightly-spaced drilling is expected to allow us to quantify the highest value mineralization within both the Current and Escape deposits. We believe that a more robust, low-tonnage high-grade production model anchored by these high-grade areas is attainable."
The summer drilling program targeted near-surface high-grade zones within the Current deposit to better define their lateral continuity and tonnage potential. These new results, in conjunction with the initial assays (see September 9th release), confirm that high-grade mineralization in the areas targeted extends beyond what was outlined in the most recent resource model (NI 43-101 technical report on the Thunder Bay North Project, Ontario, Canada, SLR Consulting Canada Ltd, June 19, 2023).
Results Confirm Improved High-Grade Continuity
The revised geological model for the high-grade areas at Thunder Bay North employs flow processes similar to those associated with alluvial gold processes. These results provide confidence and "proof of concept" that continued success in the expansion of the high-grade pods along strike is possible with tighter drilling. The Company believes that a predictive tool based principally upon geophysical data can quickly be developed that will allow the identification of additional high-grade pods that occur within the Current and Escape deposits.
Clean Air Metals' Vice President of Exploration, Lionnel Djon commented*, "The results of the proof-of-concept drilling at Current provide a high level of confidence that the high-grade pods have a regular periodicity that can be predicted using 3D geophysical models and that their tonnage potential is likely greater than previously appreciated. We are excited to follow up on these encouraging results and begin the job of delineating these high-grade domains to support an independent estimation of their tonnage and grade."*
Drilling at four high-grade target areas has produced exceptional results. Nine of the ten holes completed in the program intersected significant widths of high-grade mineralization, defined here as averaging over 6 g/t combined Pt and Pd. Hole locations relative to the high-grade targets and the different mineralized zones within the Current deposit are shown in Figure 1. Figure 2 outlines an area in the Lower Current Zone where the program delivered improved grade, continuity and volume, expanding the high-grade zone to the southeast.
Figure 1. Plan view map showing drill hole locations for the recently completed 10-hole program at the Current deposit.
https://preview.redd.it/3byh010c9g3e1.jpg?width=576&format=pjpg&auto=webp&s=0a7899caeeb922215607707dcf51192d777fd377
https://preview.redd.it/jitdxp6c9g3e1.jpg?width=515&format=pjpg&auto=webp&s=a970e8109a6685fd99669f40eaaa8f40d199a64c
Figure 3. Plan view outlining drill hole pierce points in the flat-lying section of the Bridge Zone and outlining the lateral expansion of the high-grade shell. This drilling included hole CL24-008 that returned a grade of 14.20 g/t Pteq1 over 23.4m.
https://preview.redd.it/5srhybdc9g3e1.jpg?width=473&format=pjpg&auto=webp&s=9d7065998ac5daa1b5cbe6387a0e35851a6212bb
Figure 4. Section outlining interpreted high grade shell expansion from hole CL24-010 (13.74 Pteq1)
Additional Massive Sulphide Intersected in Hole CL24-005
A second hole within the 10-hole program (Hole CL24-005) intersected 0.5m of massive sulphides near the base of the intrusion. The deposit is known to carry massive sulphides in pockets and embayments at both the Current and Escape deposits. These occurrences demonstrate the potential for these deposits to host additional massive sulphide, and continued exploration work is needed to identify the feeder zone for this material.
The Company is in the process of developing a follow-up exploration program designed to discover new high-grade zones within the Current and Escape deposits and a resource delineation program to support an independent resource estimate of the highest-grade domains in both deposits.
Reconfiguring the Mine Plan
The project path forward, that includes a smaller tonnage, high-grade and low-capital cost mine plan is buoyed by the results from this program. It is evident that higher-grade mineralization is spatially distributed in distinct and separable zones that allow for targeted extraction using traditional open-stoping mining methods. A bulk sample is under consideration as part of a move towards advanced exploration designation. The goal for the bulk sample will be to validate the high-grade mining approach outlined above, as well as quantify the metallurgical performance of a toll milling scenario on a larger scale.
Qualified Person
Dr. Lionnel Djon, Ph.D., P.Geo., a Qualified Person under National Instrument 43-101 and Vice President of Exploration for the Company, has reviewed and approved all technical information in this press release.
Table 1. Hole Assays
https://preview.redd.it/4q588wlc9g3e1.png?width=720&format=png&auto=webp&s=082db5635eb4b24d6705e17d505080d66c26ac58
  1. Refer to Note 1 on page 1 of this release
  2. Previously reported in the September 9th, 2024 press release
Table 2. Hole Coordinates
https://preview.redd.it/ttlz7lsc9g3e1.png?width=720&format=png&auto=webp&s=891f2b057a6dd40645b65c7430ed3232e457649c
Quality Assurance / Quality Control
Clean Air Metals uses ALS Global ("ALS"), a well-established and recognized mineral assay and geochemical analytical services company. The Thunder Bay laboratory holds ISO-9000 accreditation; the Vancouver facility holds ISO-17025 registration.
All NQ-sized drill core is cut with a diamond-tipped saw blade with half of the core submitted to ALS for sample preparation and analysis. Sample preparation is completed at the ALS sample preparation facility in Thunder Bay, ON, and analysis is completed at the primary ALS assay laboratory in Vancouver, B.C.
Clean Air Metals follows a quality control procedure for its core assay sampling program: inserting blind blanks and certified Palladium-Platinum and Copper-Nickel standards into the sample stream. The insertion procedure follows industry standards with control sample frequency depending on the length of the sampled interval.
Gold, platinum, and palladium are analyzed using fire assay (FA) with an inductively coupled plasma mass spectrometry (ICP-MS) finish. Samples with grades above the optimal ICP-MS detection limits are analyzed using an optical emission spectroscopy method (ICP-OES).
Also, thirty-three (33) elements of each sample, including copper, nickel, silver, chromium, cobalt, and sulphur, are analyzed by a multi-element analytical method using the atomic emission spectroscopy (ICP-AES) technique following four-acid digestion of the sample. When samples have grades above the optimal detection limits for this analytical method, they are re-analyzed using a high-grade assay method with an ICP finish.
About Clean Air Metals
Clean Air Metals is a development and exploration company advancing its flagship, 100% owned Thunder Bay North Critical Minerals ("TBN") project, 40 km northeast of Thunder Bay, Ontario. The TBN project, accessible by road and next to established infrastructure, hosts two (2) deposits - the Current and Escape deposits, only 2.5 km apart. Together, the deposits host a 13.8 Mt indicated mineral resource containing 2.4M Pt eq. oz (Technical Report on the Thunder Bay North Project, Ontario Canada, NI43-101, SLR Consulting Canada Ltd, June 19, 2023) with significant potential for expansion down-plunge.
One of the rare primary platinum resources outside of South Africa, the TBN project is in a stable and mining-friendly jurisdiction and benefits from longstanding relationships with local First Nations. With its proven technical team, Clean Air Metals is committed to growing the resources at the TBN project and creating long-term value for shareholders.
Social Engagement
Clean Air Metals Inc. acknowledges that the Thunder Bay North Critical Minerals Project is located within the area encompassed by the Robinson-Superior Treaty of 1850 and includes the territories of the Fort William First Nation, Red Rock Indian Band, Biinjitiwabik Zaaging Anishinabek and Kiashke Zaaging Anishinaabek. Clean Air Metals also acknowledges the contributions of the Métis Nation of Ontario, Region 2 and the Red Sky Métis Independent Nation to the rich history of our area.
The Company appreciates the opportunity to work in these territories and remains committed to the recognition and respect of those who have lived, travelled, and gathered on the lands since time immemorial. Clean Air Metals is committed to stewarding Indigenous heritage and remains committed to building, fostering and encouraging a respectful relationship with First Nations, Métis and Inuit peoples based upon principles of mutual trust, respect, reciprocity and collaboration in the spirit of reconciliation.
ON BEHALF OF THE BOARD OF DIRECTORS
"Mike Garbutt"
Mike Garbutt, CEO of Clean Air Metals Inc.
Connect with us on X/ Facebook/ Instagram.
Visit www.cleanairmetals.ca for more information or contact:
Mia Boiridy
Director of Communications and Investor Relations
250-575-3305
[[email protected]](mailto:[email protected])
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Cautionary Note
The information contained herein contains "forward-looking statements" within the meaning of applicable securities legislation. Forward-looking statements relate to information that is based on assumptions of management, forecasts of future results, and estimates of amounts not yet determinable. Any statements that express predictions, expectations, beliefs, plans, projections, objectives, assumptions or future events or performance are not statements of historical fact and may be "forward-looking statements." Forward-looking statements are subject to a variety of risks and uncertainties which could cause actual events or results to differ from those reflected in the forward-looking statements, including, without limitation: political and regulatory risks associated with mining and exploration; risks related to the maintenance of stock exchange listings; risks related to environmental regulation and liability; the potential for delays in exploration or development activities or the completion of feasibility studies; the uncertainty of profitability; risks and uncertainties relating to the interpretation of drill results, the geology, grade and continuity of mineral deposits; risks related to the inherent uncertainty of production and cost estimates and the potential for unexpected costs and expenses; results of prefeasibility and feasibility studies, and the possibility that future exploration, development or mining results will not be consistent with the Company's expectations; risks related to commodity price fluctuations; and other risks and uncertainties related to the Company's prospects, properties and business detailed elsewhere in the Company's disclosure record. Should one or more of these risks and uncertainties materialize, or should underlying assumptions prove incorrect, actual results may vary materially from those described in forward-looking statements. Investors are cautioned against attributing undue certainty to forward-looking statements. These forward-looking statements are made as of the date hereof, and the Company does not assume any obligation to update or rvise them to reflect new events or circumstances except in accordance with applicable securities laws. Actual events or results could differ materially from the Company's expectations or projections.
SOURCE:
View the original press release on accesswire.com
​
https://preview.redd.it/jw0mc51d9g3e1.png?width=4000&format=png&auto=webp&s=33ba721ed1e8e77d791742d1fca5784394f62f16
Universal Site Links
CLEAN AIR METALS INC
STOCK METAL DATABASE
ADD TICKER TO THE DATABASE
www.reddit.com/Treaty_Creek
REPORT AN ERROR
submitted by Then_Marionberry_259 to Treaty_Creek [link] [comments]

2024.11.27 13:54 Throwaway7131923 Best Heroes for Indomitus Elite?

Hey all!
Question's in the title - I've been playing for a few months now and have completed the non-elite campaigns for Indomitus, Ind. Mirror and Fall of Caida. I've got my eye on Indomitus Elite either now or in the near future, but want to build up a squad capable of clearing at least the first couple of bosses before I start working through it.
Indomitus Elite requires Varro, Certus and Bellator. I'm undecided who my other two should be.
I have: Incisus, Tjark, Arjac, Azrael, Baraqiel, Vindicta and Lucien. Close to having: Isabella, Sibyll, Kut Skoden Some progress towards: Celestine, Marneus Calgar
My shortlist is probably: A healer (Incisus or Isabella) + one of Vindicta, Celestine, Calgar (lucien?) What do you all think? Who should I train up for Ind. Elite?
submitted by Throwaway7131923 to tacticus [link] [comments]

2024.11.27 13:54 One_Toe6661 Amazing!

Amazing! submitted by One_Toe6661 to GetStudying [link] [comments]

2024.11.27 13:54 Advanced-Win2709 Does Mensa accept general ability?

I’m looking to join Mensa this year, but I am unsure if they accept my scores. When I was little, I took the wheschler achievement test. The person proctoring the test said that my iq was actually 130+ and put that for the general ability score. But my FSIQ is much lower because of a dislexia eye thing that I had when I was younger. The lady said that because it was basically a disability, they may count my general ability instead of FSIQ. Would Mensa reach the same conclusion? Or would I have to retest?
submitted by Advanced-Win2709 to mensa [link] [comments]

2024.11.27 13:54 Tommy911111 Bambulab x1c now or never

I am planning to get a bambulab x1c with ams for Christmas but I’m unsure whether to get it or wait for a newer one. I have an anycubic viper and it’s having problems and being very slow (60mm/s) Now I am asking u guys shall I get it or wait?
submitted by Tommy911111 to BambuLab [link] [comments]

2024.11.27 13:54 jonthadontv Gold Farming

Any tips or suggestions on how to farm or at least gain the most gold as a FTP?
I'm stuck with a lot of my power levels simply because I keep running out of gold to upgrade weapons, artifacts, etc.
submitted by jonthadontv to SoloLevelingArise [link] [comments]

2024.11.27 13:54 Alarming_Ad7399 22F what do u think i can do better ?

22F what do u think i can do better ? submitted by Alarming_Ad7399 to Howtolooksmax [link] [comments]

2024.11.27 13:54 thumbpilmo Wanted to share the layout I just customized :>

Wanted to share the layout I just customized :> submitted by thumbpilmo to musicbee [link] [comments]

2024.11.27 13:54 LedVapour Fishing gone too far.

Fishing gone too far. submitted by LedVapour to factorio [link] [comments]

2024.11.27 13:54 OlleyatPurdue Ok Ducktail fans, fill this chart.

Ok Ducktail fans, fill this chart. submitted by OlleyatPurdue to ducktales [link] [comments]

2024.11.27 13:54 Busy-Ad-1278 im down 20 and this how we start off the first drive🤦‍♂️

im down 20 and this how we start off the first drive🤦‍♂️ submitted by Busy-Ad-1278 to MaddenMobileForums [link] [comments]

2024.11.27 13:54 aczemdone Sierra Trading Post Black Friday 2024 Offers

Check out the link for Sierra Trading Post Black Friday 2024 Offers. Once on the website, you'll have access to a variety of coupons, promo codes, and discount deals that are updated regularly to help you save on your purchase.
submitted by aczemdone to SuddenDaily [link] [comments]

2024.11.27 13:54 moklippp Porn music video music group send samp

XYR6MLT7U
submitted by moklippp to Snapchatgerman [link] [comments]

2024.11.27 13:54 United-Rooster7399 The end?

The end? I failed onboarding assessment of two projects and I am marked low quality? Today I got a English Assessment after being EQ which went very well and now I see this page.
I never did proper tasks on a project. I didn't get past the onboarding stage in those two projects. Should I give up on outlier? Is there anything that can help? Changing expertise? Mailing them that I never did a task?
submitted by United-Rooster7399 to outlier_ai [link] [comments]

2024.11.27 13:54 amitycovenn is 20 and 23 a weird age gap?

i’m 20 and my partner is 23!
submitted by amitycovenn to LesbianActually [link] [comments]

2024.11.27 13:54 Suspicious_Area_4929 What type do you think blue is?

submitted by Suspicious_Area_4929 to mbti [link] [comments]

2024.11.27 13:54 clouduru-senpai I'm doing an AU, so here are the character design sketches

I'm doing an AU, so here are the character design sketches I'm making an alternative universe of Murder drones, but I'm making a fanfic and I can possibly make some drawings to show excerpts from the work.
It will be an unconventional crossover.
https://archiveofourown.org/works/55942033/chapters/142059904
Here is the link to the work if you want to take a look, yes it is a crossover of Nanatsu no taizai and Murder drones. I am a very creative person.
submitted by clouduru-senpai to MurderDrones [link] [comments]

2024.11.27 13:54 Crazybubba FS: Orioles Stitched Majestic Jersey M

FS: Orioles Stitched Majestic Jersey M Condition is excellent, I caught no flaws. Just fits small on me now. Selling for $50 shipped to your door (US/Canada)
Will also trade for size 44 jerseys if you’d like.
submitted by Crazybubba to baseballunis [link] [comments]

2024.11.27 13:54 Thin-Cup-3932 What can i do to improve my grade ?

Hey everyone,
I’m currently sitting on a 4-4 in Combined Science, and my goal is to push it to a 5 by January so I can move up to the Higher paper. I genuinely believe in myself—I managed to get an 8 in my English Literature mock, so I know I’m capable of achieving good grades because ive jumped by 3 grades in most of my subjects
The challenge is, I have ADHD, and focusing can be really tough for me. Traditional flashcards (front and back) don’t work well because my brain loses track, but I’ve heard about cloze Anki cards—should I give those a go?
Also, do you think I should try using mind maps instead of flashcards, and pair that with practice questions and some active recall? I’d love to hear what’s worked for you if you’ve struggled with similar challenges!
Thanks in advance 😊
submitted by Thin-Cup-3932 to GCSE [link] [comments]

2024.11.27 13:54 Aggressive_Finding_3 Girls, answer this following questions

  1. If a boy approaches you in a public place while traveling,will you appreciate that or feel disgusted?? 2.If there are two guys with same looks and personality but the difference is one is tall and obese and other is fit but short(same height as you),who would you choose?? 3.If a friend of you who is decently attractive,asks you for a one night stand what would you do??
  2. suppose you are veg and he eats non-veg is that a red flag?
  3. Will you date someone who has cheated in a past relationship??
submitted by Aggressive_Finding_3 to IndianTeenagers [link] [comments]

2024.11.27 13:54 Schmandrea1975 Follow up from yesterday. Ray Lewis doing the hallway dance

Follow up from yesterday. Ray Lewis doing the hallway dance submitted by Schmandrea1975 to HilariaBaldwin [link] [comments]

https://yandex.ru/