Since im currently watching this show, I’d like to know if you’ve seen it what do you think of ted lasso?

2025.01.21 03:30 captainamerica06000 Since im currently watching this show, I’d like to know if you’ve seen it what do you think of ted lasso?

Since im currently watching this show, I’d like to know if you’ve seen it what do you think of ted lasso? submitted by captainamerica06000 to YMS [link] [comments]

2025.01.21 03:30 Chooptown Welcome back to Starbucks

I was just curious about this meeting this week because it’s 3 hours long. What would we be even doing for three hours? Are we all cooped up in the cafe?
submitted by Chooptown to starbucks [link] [comments]

2025.01.21 03:30 jvc72 Buy Signal Jupiter USD - 20 Jan 2025 @ 22:27 -> USD0.896

Ticker: JUPUSD
Exchange: CRYPTO
Time: 20 Jan 2025 @ 22:27
Price: USD0.896
Link: https://getagraph.com/crypto-currencies/JUPUSD/ENG
submitted by jvc72 to getagraph [link] [comments]

2025.01.21 03:30 jacodel Mon petit chat...

Mon petit chat... submitted by jacodel to Oilpastel [link] [comments]

2025.01.21 03:30 AwesomeGirll Have someone got steroid for almost 30years, and go with tsw? May i know how long it will take times to heal?

submitted by AwesomeGirll to TS_Withdrawal [link] [comments]

2025.01.21 03:30 Specialist_Egg7117 How much would a $400k condo be with by spring?

I know this is an guesstimate at best, but given the climate with condos, how much value do you see dropping by spring / summer this year?
submitted by Specialist_Egg7117 to TorontoRealEstate [link] [comments]

2025.01.21 03:30 Fun_Long_7242 here have a jiatendonetwork copypasta

YOU KNOW THEY SAY ALL MEN ARE CREATED EQUAL. BUT YOU LOOK AT ME AND YOU LOOK AT JIAS AND YOU CAN SEE THAT STATEMENT IS NOT TRUE! SEE NORMALLY IF YOU GO 1 ON 1 WITH ANOTHER COMMUNITY MEMBER YOU GOT A 50/50 CHANCE OF WINNING! BUT I'M AN ACTUALLY SENSIBLE PERSON AND I'M NOT RUDE AF! SO YOU GOT A 25% AT BEST AT BEAT ME! AND THEN YOU ADD THE REST OF THE COMMUNITY TO THE MIX, YOU THE CHANCES OF WINNING DRASTIC GO DOWN! SEE THE 3 WAY AT JIATENDONETWORK YOU GOT A 33 1/3 CHANCE OF WINNING. BUT I, I GOT A 66 2/3 CHANCE OF WINNING CAUSE JIAS KNOWS HE CAN'T BEAT ME AND HE'S NOT EVEN GONNA TRY! SO JIAS YOU TAKE YOUR 33 1/3 CHANCE MINUS MY 25% CHANCE AND YOU GOT 8 1/3 CHANCE OF WINNING AT JIATENDONETWORK. BUT THEN YOU TAKE MY 75% CHANCE OF WINNING IF WE WAS TO GO 1 ON 1 AND THEN ADD 66 2/3 %. I GOT A 141 2/3 CHANCE OF WINNING AT JIATENDONETWORK! SENIOR JIAS? THE NUMBERS DON'T LIE AND THEY SPELL DISASTER FOR YOU AT JIATENDONETWORK!
submitted by Fun_Long_7242 to JiatendoNetwork [link] [comments]

2025.01.21 03:30 Useful-Knowledge8836 Can anyone help me identify these? Og cast no Eva

submitted by Useful-Knowledge8836 to Broadway [link] [comments]

2025.01.21 03:30 Due_Survey6205 Can I run a 54 in the 400?

I’ve been training pretty hard and have been doing speed endurance at least once a week, for the past 3 months and have seen a lot of improvement just by using the training plan that I use, my current 200 time is 25 but I wasn’t feeling 100% that day and kind of tired, If I was feeling more up to it I could’ve ran 24, I know that for a fact, but I have a meet on Saturday and it’s the first 400 of the indoor season, and on race days I drink 150mg of caffeine an hour before and I’ve found that it’s the perfect amount and gets me feeling pretty ready, based on this, is it possible for me to run a 54?
submitted by Due_Survey6205 to Sprinting [link] [comments]

2025.01.21 03:30 Amazing_Finish_5490 if i extraction my 2 upper promler for my over-jet will my jaw become smaller and slimmer or there will not be any difference in jaw because i’m scared of that

submitted by Amazing_Finish_5490 to jawsurgery [link] [comments]

2025.01.21 03:30 rodiahade am i overreacting. sorry for long post….

so today me (18f) and my girlfriend (17f) we were supposed to hangout today. she was supposed to come over at 9. well it’s 15 minutes before she’s supposed to be here and she texts me “something really fucking horrible just happened” no idea what’s going on for the next 35 minutes. then, from her moms phone, she texts me that she isn’t coming over today and that she smashed her phone on the ground. i don’t know what’s happening or going on. so a couple hours later she texts me (still from her moms phone, it will be that way the whole time) that she has to fix her phone. anyways it’s around 3:30 and i’m at work for the rest of the day. fast forward to just in the past half hour, we finally called (moms phone) and she explained what happened. basically since she woke up early, she was agitated and annoyed. her car’s windshield wipers were broken. her dads battery to his car was dead. so she’s looking for a brush for the car, then her uncle comes out and asks her what she is doing. she yells at him, and back to her he yells for 5 minutes back to her calling her mean names and saying mean stuff. after that event she goes back inside, and immediately her mom and dad are there yelling at her for being a “brat” to her uncle. she yells back, they fight, then her parents tell her to give her phone to them. she smashes it on the ground. her phone is fucked up and broken.
so she tells me about her day. she had to try and get it repaired (mom drove her) and she had to pay out of her own money for a new phone. she wasn’t allowed to visit me anymore that day. then later that evening hrr parents let her go see a movie with her friends, they drove her and everything.
i am just so UPSET at this whole situation. she couldn’t see me and still saw her friends. i barely could talk to her today to know about anything going on. she acted childish and smashed her phone. a list of things i’m upset about
so we’re on the phone and i express my frustration, my disappointment, my sadness. i tell her that was childish of her to do. she’s upset at me for not comforting her and making her happy. but in my opinion, i am just being realistic. like i understand she had a horrible day and it was (quote) one of the worst days of her life. but her mom drove her to fix her phone?? she let her go to the movies?? i couldn’t even fucking hangout with her. i don’t know how to justify that, because obviously we couldn’t hangout after the morning since i had word. but still, it upsets me her parents gave her the only consequence of having to pay for a new phone.
anyways, am i overreacting for not comforting her? and for making her day better than it was? i’ll be honest, i did have a mean tone 95% of the call, so i really wasn’t nice at all. should i have been? but if i was, that would just be not expressing how i feel. please help
submitted by rodiahade to AmIOverreacting [link] [comments]

2025.01.21 03:30 trapdoorexit .

submitted by trapdoorexit to chillin_out [link] [comments]

2025.01.21 03:30 Timely_Instance_632 My progress.

My progress. submitted by Timely_Instance_632 to Ninjago [link] [comments]

2025.01.21 03:30 erer1243 Currently, it's January 20, 2025 at 10:30PM

Currently, it's January 20, 2025 at 10:30PM
submitted by erer1243 to every15min [link] [comments]

2025.01.21 03:29 niswank هل دواء سيلدافا يرفع الضغط؟ كل ما تحتاج معرفته

سيلدافا هو دواء يُستخدم بشكل شائع لعلاج ضعف الانتصاب لدى الرجال. يحتوي سيلدافا على المادة الفعّالة سيلدينافيل، والتي تساعد على تحسين تدفق الدم إلى الأعضاء التناسلية، مما يسهم في تعزيز الانتصاب. لكن السؤال الذي يتردد بين العديد من الأشخاص هو: هل سيلدافا يرفع الضغط؟ في هذا المقال، سنناقش تأثير سيلدافا على ضغط الدم وكيفية استخدامه بشكل آمن. هل سيلدافا يرفع الضغط؟​ سيلدافا يعمل عن طريق توسيع الأوعية الدموية وزيادة تدفق الدم إلى الأعضاء التناسلية، لكن قد يتساءل البعض إذا كان له تأثير على ضغط الدم. في الحقيقة، سيلدافا لا يرفع ضغط الدم، بل على العكس، يمكن أن يؤدي إلى خفض ضغط الدم لدى بعض الأشخاص. كيف يحدث ذلك؟ آلية العمل: سيلدينافيل، المادة الفعّالة في سيلدافا، يثبط إنزيم فوسفوديستراز 5 (PDE5) في الجسم، مما يسمح بتوسيع الأوعية الدموية وزيادة تدفق الدم. هذا قد يؤدي إلى انخفاض طفيف في ضغط الدم لدى الأشخاص الذين يعانون من ارتفاع ضغط الدم. المستفيدون من خفض الضغط: يمكن أن يكون هذا مفيدًا للأشخاص الذين يعانون من ارتفاع ضغط الدم، ولكن في حالات معينة قد يتسبب في تفاعل غير مرغوب فيه، خاصة عند تناوله مع أدوية أخرى لخفض ضغط الدم. هل يجب القلق من تأثير سيلدافا على الضغط؟​ في حالات المصابين بارتفاع ضغط الدم أو أمراض القلب، يمكن أن يتسبب تناول سيلدافا في انخفاض غير متوقع في ضغط الدم، مما قد يؤدي إلى الدوار أو الإغماء. لهذا السبب، يجب على الأشخاص الذين يعانون من هذه الحالات استشارة الطبيب قبل استخدام سيلدافا. تأثير سيلدافا على ضغط الدم في حالات معينة: المصابين بضغط الدم المنخفض: قد يتسبب سيلدافا في انخفاض ضغط الدم بشكل زائد عند الأشخاص الذين يعانون من انخفاض ضغط الدم. التفاعل مع أدوية الضغط: إذا كنت تتناول أدوية لخفض ضغط الدم، فقد يحدث تفاعل بين سيلدافا وأدوية أخرى، مما يؤدي إلى انخفاض إضافي في ضغط الدم. من الضروري استشارة الطبيب بشأن الجرعة المناسبة أو ضرورة تعديل الأدوية. كيفية استخدام سيلدافا بشكل آمن​ لتجنب التأثيرات السلبية على ضغط الدم، من المهم استخدام سيلدافا حسب التعليمات الطبية: الجرعة المناسبة: تناول سيلدافا بجرعة موصى بها، عادة 50 ملغ، وتجنب تجاوز الجرعة الموصى بها. استشارة الطبيب: يجب استشارة الطبيب قبل بدء استخدام سيلدافا، خاصة إذا كنت تعاني من مشاكل في القلب أو ارتفاع أو انخفاض ضغط الدم. مراقبة الضغط: إذا كنت تعاني من أي مشاكل في الضغط أو القلب، يجب مراقبة ضغط الدم بشكل منتظم أثناء استخدام الدواء. الآثار الجانبية المحتملة لسيلدافا​ مثل أي دواء آخر، سيلدافا قد يتسبب في بعض الآثار الجانبية. قد تشمل: صداع دوار عسر الهضم احمرار الوجه اضطرابات في الرؤية (رؤية ضبابية) انخفاض ضغط الدم (في بعض الحالات النادرة) إذا كنت تواجه أي من هذه الأعراض أو أي آثار جانبية أخرى، يجب عليك التوقف عن استخدام الدواء فورًا واستشارة الطبيب. هل سيلدافا هو الحل الوحيد لضعف الانتصاب؟​ إذا كنت تبحث عن علاج لضعف الانتصاب ولكن لديك مشكلات صحية مثل ضغط الدم أو أمراض القلب، فقد يكون هناك خيارات أخرى يجب أن تناقشها مع طبيبك. يمكن للطبيب أن يقدم لك المشورة حول العلاج المناسب بناءً على حالتك الصحية الخاصة. المزيد من المعلومات والنصائح الطبية​ إذا كنت بحاجة إلى المزيد من المعلومات حول سيلدافا أو تأثيره على ضغط الدم، يمكنك زيارة منتديات نسوانجي. في هذه المنتديات، يمكنك مناقشة تجاربك الشخصية وطرح استفساراتك الطبية للحصول على نصائح من الأطباء والمختصين. كما يمكنك زيارة قسم ثقافة وصحة جنسية - استشارات طبية متنوعة للحصول على استشارات طبية إضافية حول الأدوية والعلاجات المتاحة. الخلاصة​ سيلدافا هو دواء فعّال لضعف الانتصاب ويؤثر على ضغط الدم بطريقة قد تكون مفيدة أو ضارة حسب الحالة الصحية للفرد. بالنسبة لمعظم الأشخاص، لا يؤدي سيلدافا إلى رفع الضغط بل قد يساعد في خفضه قليلاً، ولكن من الضروري استشارة الطبيب قبل استخدامه، خصوصًا إذا كنت تعاني من مشاكل صحية في القلب أو ضغط الدم. للحصول على المزيد من المعلومات الطبية والنصائح، يمكنك زيارة منتديات نسوانجي و**قسم ثقافة وصحة جنسية - استشارات طبية متنوعة**. المصدر: https://www.niswanjy.com/threads/hl-dwa-syldafa-yrf-ldght-kl-ma-thtaj-mrft-h.11519/
submitted by niswank to Arab_trend [link] [comments]

2025.01.21 03:29 RandomGirlOk Any butchfemme gl/yuri recommendations? I need it for science

Any butchfemme gl/yuri recommendations? I need it for science Image of my wife (real) for illustration 👆
submitted by RandomGirlOk to webtoons [link] [comments]

2025.01.21 03:29 Efficient-Book-2309 me_irl

me_irl submitted by Efficient-Book-2309 to vermont [link] [comments]

2025.01.21 03:29 snotballbootcamp Should I book a tattoo with an artist that I would need to fly across the country for at 18?

I know the immediate first answer will probably be "HELL no" but I just want you to hear what I have to say and then give me your opinion.
I turn 18 in April and have been interested in tattoos and being a tattoo artist since I was 12 years old. My dad is covered in them (good ones at that) and it's pretty much my dream career and I would love to get so.e sick pieces.
I have been following an artist on Instagram for a few years now and I absolutely love her work. It is beautifully done, heals incredibly well, and looks sick. The only problem is she is based in NYC and I am from MN. I have known I have wanted a tattoo from her for a while, and she has some cool flash that I'd like to get on my body.
It would be expensive as hell, approx $3750 for the hotel, flight, tattoo and 500 for transportation and food. However, I have savings of over 5000.dollars and work as a waitress and could very easily deposit most of my money into savings as I live with my parents and don't have bills.
PROS: - I get a sick tattoo that's gonna lock awesome for the rest of my life (she does blackwork/ ink brush painting style) -I start immediately with a beautiful floral piece that can work into a sleeve if i choose that further on in life (tho I don't anticipate it) instead of a smaller piece of patchwork -fun summer trip to NYC -spend the money now while I don't have bills and mortgage and shit -it is objectively a good tattoo
CONS: -very expensive and I would need to take a decent few days to go get the tattoo -I am young and my frontal lobe hasn't developed fully (tho I would say this is an informed decision and something I've been wanting for a long time) -there are probably more but I can't think of any lol
submitted by snotballbootcamp to tattooadvice [link] [comments]

2025.01.21 03:29 rusakovic 📩 DevOps Engineer Salary: 💰$115,000 - $120,000. 📍Remote job in 🇺🇸 United States

📩 DevOps Engineer Salary: 💰$115,000 - $120,000. 📍Remote job in 🇺🇸 United States submitted by rusakovic to likeremote [link] [comments]

2025.01.21 03:29 iggy_1020 Ender 3v2 Upgrade Guide/Journey in 2025

Ender 3v2 Upgrade Journey Hello all,
I wanted to share my project in hopes of helping anyone who might be lost or frustrated like I was when I first started tuning my Ender 3v2, which I received for free from someone upgrading their setup. The only non-stock items were a BLTouch and an all-metal extruder. Over the past 3-4 weeks, I’ve spent a lot of time assembling, disassembling, configuring, tuning, and printing (and then tuning and printing again!) to get my printer to a point where I can confidently say it’s “dialed in.” As we head into 2025 and approach 5 years since the Ender 3v2 was released, I wanted to share my journey and configuration with anyone who hasn't given up on their Ender 3 yet (like many have). This guide aims to provide a more up-to-date resource for modernizing and upgrading the Ender 3v2, as much of the information I found was outdated, ranging from 2 to 4 years old.
Note that this project was driven more by my passion for tinkering and exploring than by a need for a highly functional or professional-grade printer (I have a P1S for that). I had also owned an Ender 3 Pro several years ago but gave it away after only minor use and tinkering, so while I’m not a complete beginner in the Ender space, I am a bit rusty. That being said, I’ve been thrilled with the results and have had some very impressive prints (though I’ve only tested PLA+ so far).
Table of Contents

TL;DR If you're here for the quick setup details for an Ender 3v2 with:
…and you use Cura as your slicer, skip to the firmware or slicer settings sections for detailed configurations.
Disassembly and Maintenance The first step in the process was to disassemble the entire printer. I’m talking about the ENTIRE printer—stripping it down to its core for a thorough cleaning and inspection. While I had everything apart, I replaced worn-out parts, including the X/Y belts and wheels, and lubricated the Z-axis lead screw. I also swapped out the stock springs for stiffer yellow ones (I tried spacers first but wasn’t happy with the results) technically an upgrade but those springs were not so springy anymore.
Resources
Upgrades Once I had the maintenance out of the way, I moved on to the fun part—upgrading the printer. My goal was to be able to print with more advanced filaments like PETG, ASA, and TPU, which led me to quickly realize that the stock hotend wouldn’t be sufficient for these materials. Additionally, I found that the Bowden tubing could cause issues with these filaments, so I opted to upgrade to a direct drive setup. I chose the Sprite Pro extruder for its "plug-and-play" appeal.
After learning that the Z-axis motor would experience more strain with the Sprite Pro due to the added weight and extruder movement, I decided to preemptively convert a dual Z-axis setup for better stability and smoother motion. I can’t say if this was absolutely necessary, but it’s been a solid upgrade. I opted for the official Dual Z-axis Upgrade Kit.
The last upgrade was the build plate. I decided to move on from the glass plate (which was marred and in poor condition) to a magnetic textured PEI plate. I chose the official Textured PEI Build Plate not because I’m loyal to Creality, but because I can buy directly from them, which reduces the risk of receiving knock-offs or poorly made third-party accessories.
Parts list
Safety Important: If you're not familiar with these issues, I highly recommend checking out this video: Ender-3 V2 safety upgrades (ferrules, PSU ventilation holes, mainboard fan, flexible PEI sheet..) and completing the upgrades below
Assembly Once all the upgrades and parts were staged (...well, I might have accidentally installed a wrong screw or two...), I reassembled the printer starting with the base. I installed the necessary components in the control board area before assembling the Z-axis posts (this makes life much easier). I routed the wires to avoid the power switch and the back of the build plate.
Next, I swapped the glass build plate for the magnetic PEI plate—this is a straightforward process, but there are a few important steps to keep in mind. First, ensure that all the bed screws are tight and check that the X-axis belt is snug. Before installing the new build plate, take the time to clean it thoroughly. Avoid using isopropyl alcohol and cotton balls, as they may not effectively remove all residues. Instead, wash the plate with Dawn dish soap and warm water, gently scrubbing the surface to ensure it’s clean. Rinse thoroughly, dry it with paper towels, and allow it to air dry completely. Be careful not to touch the cleaned surface with your bare hands to avoid transferring oils, which could affect adhesion.
When assembling the frame, I took extra care to make sure each post was square before adding the Z-axis motors, I then assembled the rest of the Z-axis, including lead screws, screw guides, etc then i tightened them enough to hold their shape but not restrict the gantry's movement.
Now that we have our base assembled posts installed, The dual z axis upgrade installed, we can move on to our y gantry, this is the best time to square it as well, so I highly recommend using gantry levelers—either buy them or print something like this: gantry levelers. They save a lot of headaches later on.
The final assembly step was installing the top crossbar—again, make sure it’s square—and then attach the spool holder. At this point, I double-checked that the printer was square by performing a frame check where it is needed and tightened down the Z-axis motors and lead screw guides. With that, the mechanical assembly was complete!
Resources
Firmware Now, if you're running a different firmware or don't plan on switching to Professional Firmware, feel free to skip this section.
This is where things start to get interesting! When it comes to firmware, there are several options—Marlin, Klipper, or stock firmware to name a few. For my setup, I chose to go with Professional Firmware route. For me this was particularly challenging as I have a BLTouch and a Sprite Pro.. apparently those don't mix well with the firmware.. So I had to find the special release that worked with this setup and with my 4.2.2 control board. Here is a link to that release: Firmware.
Please read this page before moving on to the installation. While it may seem daunting, following these steps will save you time and energy.
Flashing the firmware is pretty straight forward and you can follow this guide: How to install the firmware
Getting Started Now we have our firmware flashed and we are ready to start the initial setup. I highly recommend that you start by following the calibration guide found here: Calibration Guide. It can be hard to follow, but it’s detailed and thorough, if you have the same setup as me, the settings below will get you into the ballpark of what you'll need.
The settings below are based off of my printer. You will need to adjust your settings as each printer is slightly different
Physical Settings (Advanced / Physical settings) Mesh Inset (Advanced / Mesh leveling / Mesh inset) Don't fret, you will still be able to print to the size of the plate
Z Probe Settings (Prepare / Z probe wizard) Slicer Settings I am using Ultimaker Cura 5.9.0, so your results will vary. Before you calibrate you need to add your settings into your slicer. In my case here is what those look like. I am also a fan of OrcaSlicer but it is a little more advanced in my opinion.
The printhead settings only apply to a Sprite Pro with a BLTouch directly mounted. The rest of the settings are for a Sprite Pro with a 0.4mm brass nozzle that's printing INLAND PLA+ Basic filament
Machine Settings Printer Settings Printhead Settings Start G-code 
M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration M203 X500.00 Y500.00 Z20.00 E50.00 ;Setup machine max feedrate M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk M220 S100 ;Reset Feedrate M221 S100 ;Reset Flowrate G92 E0 ; Reset Extruder G28 ; Home all axes M420 S1 Z2; Use a mesh leveling up to 2mm (a valid mesh must be loaded into RAM); G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line G92 E0 ; Reset Extruder G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish
End G-code 
G91 ;Relative positioning G1 E-2 F2700 ;Retract a bit G1 E-2 Z0.2 F2400 ;Retract and raise Z G1 X5 Y5 F3000 ;Wipe out G1 Z10 ;Raise Z more G90 ;Absolute positioning G1 X0 Y200 ;Present print M106 S0 ;Turn-off fan M104 S0 ;Turn-off hotend M140 S0 ;Turn-off bed M84 ;Disable steppers
Quality Speed Travel Extensions If you are going to follow my setup you should definitely install the auto towers plugin for Cura. It will make printing the calibration tests a BREEZE. If not, you should really consider using OrcaSlicer Calibration!
Calibration Now that I have my firmware flashed and my physical settings in the ballpark of where I want them, we can start our calibration to really get our printer dialed in. I will try to lead you down the best road I can but the guides below are way more fleshed out and informative.
Calibration guides * https://teachingtechyt.github.io/calibration.html * https://ellis3dp.com/Print-Tuning-Guide/ * https://youtu.be/xzQjtWhg9VE
Basic
  1. Preheat your printer, should be around 50-60C for most applications. (Prepare / Preheat) and wait for thermal stabilization.
  2. Do Bed Tramming to level the 4 corners of your bed. (Prepare / Bed Tramming)
  3. Manual bed level. Please do this before you auto level.
    1. Heat your bed to 50-60C and your nozzle to 130-140 for PLA
    2. Disable your stepper motors
    3. Get a piece of printer paper or a sticky note
    4. Move your nozzle to each corner and the center of your bed (The piece of paper should slide between the nozzle and the build plate with medium resistance)
    5. Make your adjustments and ensure that the nozzle never scrapes the bed at any point.
  4. Build a mesh leveling (Prepare / Build manual mesh or Auto level with probe)
  5. If you have a probe, set your probe Z-offset. (Prepare / Z probe wizard)
Advanced
  1. Hotend and bed MPC/PID - Go ahead and run the auto calibrations (Advanced / Hotend MPC/PID - Bed PID) - For those who aren't using Professional Firmware
  2. Extruder calibration - I fortunately did not have to adjust this.
  3. The first layer- there are 2 awesome guides here: First layer squish & First layer guide (I had much more success with the first one). I chose to go with .25mm initial layer height, and it took me many many many prints to get this 100%
  4. Baseline Print - My print turned out well but needed some work. Namely the first layer.
  5. Slicer Flow Calibration - I was dead on with this at .4mm
  6. Retraction Tuning - My results were a retraction distance of 0.6–0.8 mm at speeds of 40–50 mm/s. I used the Retraction Towers with Distance 0.4-1.2mm and Speed 35-75mm/s
  7. Speed Test - I achieved 80-100mm/s for less precise prints and 50-60mm/s for more precise prints I used the Speed Towers for this.
Additional Tuning
  1. Fan Tuning - This will be adjusted per filament type like PETG, ASA, TPU, etc. I found that 100% worked very well for my PLA+.
  2. Temperature Tuning - This needs to be done for all filaments but I was gold at 200C nozzle with a 60C build plate using INLAND PLA+ Basic. I used the Temp Towers on the PLA+ setting
  3. Bed Level Pattern - This will show if you have a high or low spot, once dialed in these should print nearly perfect.
Calibrations I skipped OctoPrint This is an entirely optional step but will massively improve your printing experience. I started by digging up my old Pi4 with 8GB ram and flashing it with OctoPi following this guide: OctoPrint Setup Guide. I did not opt to tie my RPi into my printer with the buck converter as I want the freedom to remove it. I also have an old logitech c920 webcam that I use to watch the prints. To configure OctoPrint, I followed this OctoPrint Guide for Professional Firmware.
Parts list - Raspberry Pi 4 kit that I have - Logitech-C920x
Conclusion After weeks of tuning, upgrading, and testing, my Ender 3v2 is now performing reliably with great print quality. With these upgrades, I plan to explore even more exotic materials and will likely dedicate it to printing ASA and TPU, as these filaments don't need to be printed at high speeds.
I really think that printer is still viable and shouldn't be collecting dust on your shelf!
A big thanks to everyone who contributed to the community through guides, parts, models, and tools. While I can’t list everyone, the knowledge and tools created/shared across platforms like GitHub and Thingiverse has made all of this possible!
Feel free to reach out if you have any questions, and happy printing!
Resources Software/Firmware/OS used Guides Parts list Tools used Supplies Useful Prints Other helpful stuff submitted by iggy_1020 to ender3v2 [link] [comments]

2025.01.21 03:29 Vanishing_12924 What jackets are these guys wearing?

What jackets are these guys wearing? submitted by Vanishing_12924 to tacticalgear [link] [comments]

2025.01.21 03:29 BassGSnewtype What of your town's local diners would you recommend?

submitted by BassGSnewtype to AskReddit [link] [comments]

2025.01.21 03:29 SpeedyGoneGarbage delivered to the wrong address

just completed a Fresh Order...was on my way to last stop when I got a call I recognized as Amazon. It was a customer from earlier giving me verbal abuse because I delivered to her next-door neighbor instead of her. She said she watched me from her window and was I a f*****g idiot and can't read addresses. Sadly, nothing I can do...I'll just take the hit...yes I made a mistake, but don't need the abuse.
submitted by SpeedyGoneGarbage to AmazonFlexDrivers [link] [comments]

2025.01.21 03:29 chef-chouette How to start thrill of the grill?

I’m so confused. I click on the cook but nothing starts. Only been two days but still! How do I get daily quests to come back???
submitted by chef-chouette to fo76 [link] [comments]

2025.01.21 03:29 Soggy_Visit9323 Turn and Burn Club (#ou86c)♠️♥️♣️♦️

Action Packed PLO and NLH GAMES 24/7 (.50/1.00, 1/2, 1.50/3.00)🔥🔥🔥 NEW PLAYER BONUSES: 50 chip bonus after playing 300 hands🚀🚀 50 chip referral bonus after player completes 250 hands💥💥 300 chips for highest hand count each week🔥 3000 chip FREEROLLS🚀🚀 IN GAME BONUSES: Royal Straight Flush (100 chips)🔥 Straight Flush (45 chips)💥 Quads (25 chips)🚀 Message @LarrySmith111 on telegram to play!
submitted by Soggy_Visit9323 to pokerrrr2 [link] [comments]

https://google.com/